Industrial Automation


1-Axis Microstep Driver Slave Module

1-axis Motion Controller Motionnet® slave modulesMax. 20Mbps transfer rateUltra compact, a driver integrated controller2-phase bi-polar current driving systemCurrent: Peak 8.24A / RMS 5.83A1/256 micro stepEncoder feedbackEasy installation with RJ45 phone jack and LED diagnosisDimensions: L-74 x W-140 x H-29mm
Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
Incremental encoder input ±EA, ±EB
Encoder index signal input ±EZ
Position control Incremental mode / Absolute mode;
Data range: 28 bits
Home return mode 13 types
Input Voltage 18VDC to 36VDC
Drive model 2-phase, bi-polar current driving system
Current consumption 3.1W typical (130mA/24VDC) no load
Ambient temperature In use: 0 ~ 50°C;
In storage: -20 ~ 70°C
Humidity In use: 35 ~ 85% (Non-condensing);
In storage: 10 ~ 90% (Non-condensing)
Vib. Resist 0.5G
Current setting Current: Peak 8.24A / RMS 5.83A;
Selected: Using a variable resistor;
STOP: 0~F;
RUN: 0~F
Micro step 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/28, 1/256, selected by rotary switch 0~8
LED display OT, OTPW, S2G, EL+, EL-, ORG, EMG, SD, PWR
I/O input signal PEL, MEL, ORG, SD and EMG
I/O output signal CMP
STP-M112A Motionnet® 2-phase microstep driver w. encoder
STP-M112B Motionnet® 2-phase microstep driver wo. encoder​
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M