Industrial Automation


2-port isolated CAN Bus card

PCI Express x1 compliantLow profile form factorCAN 2.0 A,B ProtocolTwo independent CAN communication operationUp to 1 Mbit/s programmable transfer rate on each port120 ohm termination resistor selected by jumper
Number of port 2
CAN controller SJA1000
Protocol CAN 2.0 A,B
Speed 1Mbps
Signal support CAN_H, CAN_L, GND
Isolation voltage 3750Vrms
Termination resistor 120 ohm selected by jumper
Connectors DB15 Male
Bus interface 1-lane 2.5 Gb/s PCI Express
Power consumption 3.3VDC at 100mA, 12VDC at 100mA typical
Working temperature 0 to 60°C
LPE-C122 2-port isolated CAN Card
Y Cable from DB15 to Two DB9 MM DB15 - DB9M+DB9M, 0.5M