Industrial Automation

207-D5xx Series (64-Channel)

64-Ch. DI/O Slave Module with Pluggable Terminal

64-Ch. DI/O Slave Module with Pluggable TerminalMax. 100Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosticPluggable terminal block with spring plug connectorsDIP switch for address settingDIN rail mounting (L-122 x W-65 x H-104 mm)
Serial interface Fast Ethernet, Full-Duplex
Distributed clock 1ms
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 100Mbps
I/O isolation voltage 3750Vrms
Number of inputs 32 Ch. / 64 Ch.
Input types NPN /PNP type
Input impedance 5.6KΩ/0.5W
Input current ±5mA(Max)
Number of outputs 32 Ch.
Output types NPN: open collector Darlington;
Integral suppression on diodes for inductive loads
Switch capacity Each output Ch. is 100mA at 24VDC
Response time On to Off, about 50μs;
Off to On, about 10μs
Over current protection 1A (Max) for each port (8-Ch.)
Power supply 24VDC±10%
Power consumption 6W typical
Working temperature 0 to 60℃
207-D522-NN/PP 32-Ch. DI and 32-Ch. DO with NPN/PNP type​
207-D540-NX/PX 64-Ch. Digital input (DI) with NPN/PNP type
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M