IBASE

Industrial Automation

207-D402H-XN_XP

16-Ch. DI/O Slave Module with Pluggable Terminal

16-Ch. DO Slave Module with Pluggable TerminalMax. 100Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosticPluggable terminal block with spring plug connectorsDIP switch for address settingDIN rail mounting (L-122 x W-65 x H-104 mm)
Specification
Serial interface Fast Ethernet, Full-Duplex
Distributed clock 1ms
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 100Mbps
I/O isolation voltage 3750Vrms
Output types Open Drain MOSFET;
Integral suppression on diodes for inductive loads
Switch capacity Each output Ch. is 500mA at 24VDC
Response time On to Off, about 50μs;
Off to On, about 10μs
Over current protection 4A (max) for each port (8-Ch.)
Power supply 24VDC±10%
Power consumption 3W typical
Working temperature 0 to 60℃
207-D402H-XN 16-Ch. Digital output (DO) with NPN type
207-D402H-XP 16-Ch. Digital output (DO) with PNP type
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M
DATASHEETS
207-D402H-XN_XP

RELATED PRODUCTS