Industrial Automation


16-channel Digital input and 16-channel Digital output slave module with pluggable terminal

16-Ch. DI/O Slave Module with Pluggable TerminalMax. 100Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosticPluggable terminal block with spring plug connectorsDIP switch for address settingDIN rail mounting (L-122 x W-65 x H-104 mm)
Serial interface Fast Ethernet, Full-Duplex
Distributed clock 1ms
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 100 Mbps
I/O isolation voltage 3750Vrms
Number of inputs 16 Ch.
Input types NPN / PNP type
Input impedance 5.6KΩ/0.5W
Input current ±5mA(Max)
Number of outputs 16 Ch.
Output types NPN / PNP type
Switch capacity Each output Ch. is 100mA at 24VDC
Response time On to Off, about 50μs;
Off to On, about 10μs
Over current protection 1A (Max) for each port (8-Ch.)
Power supply 24VDC±10%
Power consumption 3W typical
Working temperature 0 to 60℃
207-D222-NNS 16-Ch. Digital Input (DI) and 16-Ch. Digital Output (DO) with NPN type​
207-D222-PPS 16-Ch. Digital Input (DI) and 16-Ch. Digital Output (DO) with PNP type
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M