Industrial Automation


8-Ch. Analog input Slave Module with Pluggable Terminal

8-Ch. Analog Input Motionnet® slave modulesMax. 20Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosisConnectors with screw terminal blockDIN rail mounting (L-75 x W-124 x H-32 mm)
Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
Number of inputs 8-Ch. differential
Effective resolution 16 bits
Input impedance 20MΩ
Input type 4 ~ 20mA with switchable resistor (No need external resistor);
Thermocouple type: E, J, K, T
Sample rate Low speed: 5Hz / 8-ch.;
High speed: 50Hz / 8-ch.
Fault and over-voltage protection Up to ±12V
Accuracy 0.1% or better
Photo-isolation 3750Vrms
Intra-module isolation 3000VDC
CMR@50/60Hz 110dB
Power supply 18VDC to 36VDC
Power consumption 3W typical
Working temperature 0 to 60°C
108-T140 8-Ch. temperature slave module for thermocouple
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M