IBASE

Industrial Automation

108-A222

8-Ch. Analog input and 4-Ch. Analog output Slave Module with Pluggable Terminal

8-Ch. Analog Input and 4-Ch. Analog Output Motionnet® slave modulesMax. 20Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosisConnectors with screw terminal blockDIN rail mounting (L-75 x W-124 x H-34 mm)
Specification
Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
I/O isolation voltage 3750Vrms
Number of inputs 8 Ch.
Effective resolution 12 bits
Input impedance 20MΩ
Input range 0~10V, 4~20mA
Output impedance 0.3Ω
Output range 0~10V
Sample rate 10ms/ch.
Fault and over-voltage protection Up to ±12V
Accuracy ±2LBS(INL) / ±0.2LBS(DNL)
Zero Drift (ADC) ±0.2uV/°C
Span Drift (ADC) ±0.5ppm/°C
Zero Drift (DAC) -0.5ppm/°C (25°C ~125°C)
Span Drift (DAC) -3ppm/°C
Power supply 18VDC to 36VDC
Power consumption 3W typical
Working temperature 0 to 60°C
108-A222 8-Ch. Analog input / 4-Ch. Analog output
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M
DATASHEETS
108-A222

RELATED PRODUCTS