Industrial Automation

107-D1xx Series (32-Channel)

32-Ch. DI/O Slave Module with Pluggable Terminal

32-Ch. Motionnet® Digital I/O slave modulesMax. 20Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosisPluggable terminal block with spring plug connectorsDIN rail mounting (L-122 x W-65 x H-104 mm)
Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
I/O isolation voltage 3750Vrms
Input types NPN
Input impedance 5.6KΩ/0.5W
Input current ±5mA (Max.)
Output types NPN open collector darlington transistors
Switch capacity Each output Ch. is 100mA at 24VDC
Response time On to Off, about 50μs;
Off to On, about 10μs
Over current protection 1A (Max.) for each port (8-Ch.)
Power supply 24VDC±10%
Power consumption 4W typical
Working temperature 0 to 60°C
107-D140-NXT 32-Ch. Digital input
107-D122-NNT 16-Ch. Digital input / 16-Ch. Digital output
107-D104-XNT 32-Ch. Digital output
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M