IBASE

Industrial Automation

106-A180A

8-Ch. Analog input Slave Module with Pluggable Terminal

8-Ch. Analog Input Motionnet® slave modulesMax. 20Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnosisConnectors with screw terminal blockDIN rail mounting (L-75 x W-124 x H-32 mm)
Specification
Serial interface Half duplex RS-485 with transformer isolation
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 2.5Mbps, 5Mbps, 10Mbps and 20Mbps
I/O isolation voltage 3750Vrms
Number of inputs 8 Ch.
Effective resolution 16 bits
Input impedance 20MΩ
Input range Standard ±10V, ±5V, ±2.5V,±1.25V (106-A180A-01)
Sample rate Programmable, 1/(1~255)ms;
samples/sec.
Fault and over-voltage protection Up to ±25V
Accuracy 0.1% or better
Zero Drift (ADC) ±3uV/°C
Span Drift (ADC) 25ppm/°C
CMR@50/60Hz 92dB
Power supply 18VDC to 36VDC
Power consumption 1.5W typical
Working temperature 0 to 60°C
106-A180A 8-Ch. Analog input(±10V, ±5V, ±2.5V, ±1.25V)
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M
DATASHEETS
106-180A

RELATED PRODUCTS