RISC Platform


Low-Power 3.5" SBC with NXP ARM® Cortex-A9 i.MX 6Dual Processor

  • NXP Cortex™-A9, i.MX 6Dual processor
  • Supports HDMI and dual LVDS
  • 1GB DDR3, 4GB eMMC and SD socket for expansion
  • Embedded I/O, COM, GPIO, USB, USB-OTG, audio and Ethernet
  • M.2 E-Key (2230) and Mini PCI-E with SIM socket for wireless/4G/LTE connectivity
  • Fanless
  • Wide Temperature
Form Factor 3.5-inch SBC
Processor NXP Cortex™-A9 i.MX 6Dual processor
System Memory 1GB DDR3 on board
Flash Memory 4GB eMMC on board (optional 8/16/32/64 GB)
Display 2x 18/24-bits single LVDS /1x Dual LVDS, up to 1366 x 768 for 2ch, 1920 x 1080 for 1ch
1x HDMI V1.4, up to 1080P at 60Hz
Video Codec • 1080p60or30 + D1 Dual 1080p decode
• 1080p30 H.264BP
• Dual 720p encode
Graphics • Vivante GC2000, OpenGL, GL ES 2.0 & Halti, CL EP
• Vivante GC355, OpenVG 1.1
Edge I/O 1x RJ45 GbE LAN
2x USB Type-A
1x USB OTG (mini-USB Type-B)
1x RS232/422/485 (D-SUB 9 male connector)
1x SD socket (UHS-I SDR-104, max.104MB/s)
1x Reset button
Internal I/O 1x Dual channel LVDS (FHD)
1x Backlight, 3.3V/1A, 5V/1A, 12V/1A (jumper selection)
2x USB 2.0 header
1x M.2 E-Key (2230) w/ USB, SDIO, UART, PCI-E
1x Mini PCI-E (USB only) w/ SIM socket
1x SATA & 4-pin header for the power, 5V/12V
2x CAN Bus 2.0B (2*3 pin header)
1x I²C header
1x 2-wire UART header (for Debug Console Port)
2x 2-wire UART (6-Pin header, 1.0mm)
1x Audio header (Line-in and Line-out)
8x GPIO (2*5 pin header 1.0mm)
3x green LEDs (for Power on/off, wireless status, and Programmable)
Expansion IO N/A
Watchdog 256 Levels, 0~128 secs
Dimensions 147mm x 102mm (5.8" x 4")
Power Input 12V DC-in jack
Operating Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Relative Humidity 10%~90% (non-condensing)
OS Support Yocto v2.1
Android 6.0.1
Certification CE/ FCC Class-B
IBR117 3.5” ARM-based SBC, NXP Cortex™-A9, i.MX 6Dual 1GHz processor, 1GB DDR, 4GB eMMC, Dual LVDS, HDMI, RS-232/422/485, USB, M.2 E-Key (2230) and Mini PCI-E w/ SIM socket
CATALOGS 2022 RISC Based Embedded Solutions

By becoming an IBASE member, you can have access to the test reports, certifications, 2D/3D drawings and MTBF reports from our member site. Not a member? Join Now!