- Embedded VIA Eden™-V4/C7™ processor
- Up to 2.0GHz, 400MHz/533MHz FSB
- 1x DDR2 DIMM, Max. 1GB
- Integrated VGA, support 18-bit/24-bit dual channel LVDS
- 10/100 BaseT on board, optional Gigabit LAN
- 6x USB 2.0, 2x SATA, 4x COM
- 1 x PCI, 1 x Mini PCI slot, optional TV-out
CPU Supported
VIA Eden™-V4 / VIA C7™, 400MHz ~ 1.8GHz
Cache
128KB L2 cache, CPU integrated
Chipset
VIA CN700 / VT8237R+ Chipset:
North bridge: CN700 / 567-pin HSBGA
South bridge: VT8237R+, 539-pin PBGA
Front Side Bus
400MHz / 533MHz
BIOS
Award BIOS, ACPI supported
System Memory
One DDRII DIMM socket
Supports up to 1GB DDRII SDRAM
VGA
VIA CN700 integrated
128-bit Unicrhome Pro 3D/2D controller
Supports 16/32/64MB frame buffer size
DVI
ID393 card: VIA VT1632A (with DVI edge connector to be located above the USB stack connector)
LVDS
Supported by VIA VT1631L for 18-bit or 24-bit dual channel LVDS
LAN
LAN1: Built-in VT8237R+ 10/100 LAN MAC + VT6103 PHY
LAN2: Optional RTL8110S-32 Gigabit LAN controller (MB770F only)
Audio
VIA VT8237R+ built-in sound controller + AC97 Codec ALC655
5.1 channel (Line-out, Line-in, Mic)
LPC I/O
Winbond W83697HG
COM1, COM2 (RS-232), FDC 1.44MB (Slim), IrDA, Hardware Monitor ( 2 thermal inputs, 6 voltage monitor inputs, 1 chassis open detection, 2 fan headers)
Secondary I/O
Fintek F81216D for COM3 / COM4 (RS-232)
USB
6 ports, USB 2.0 ( 4 ports onboard, 2 via pin header)
Serial ATA
2 ports, support RAID 0, 1
IrDA
Pin header on board
IDE Interface
Two channels; supports Ultra DMA 33/66/100/133
40-pin box-header x 1 (IDE1), 44-pin header x 1 (IDE2)
FDD Interface
Slim type connector supports slim type FDD drives
Watchdog Timer
Generates system reset; 256 levels
Keyboard and Mouse
PS/2 type connectors
Expansion Slots
1 PCI support 2 bus master, Mini PCI slot
Edge Connectors
PS/2 Keyboard/Mouse
VGA CRT, COM1
Optional RCA Jack, S-Video for TV out
Optional DVI via ID393
RJ-45 for LAN1 + USBx2 (USB0, 1)
RJ-45 for LAN2
Audio (Speaker, Line in, Mic)
Power Connector
ATX
Form Factor
Mini ITX motherboard
Dimensions
170mm x 170mm
Power Consumption
VIA Eden™-V4 1.0GHz w/ 1GB DDR2
+5V: 2.1A
+12V: 0.77A
+3.3V: 0.83A
+5Vsb: 0.98A
Rear Connectors
Operating Temperature
0°C~60°C (32°F~140°F)
Storage Temperature
-20°C~80°C (-4°F~176°F)
Relative Humidity
10%~90% (non-condensing)
|
| MB770-R |
VIA Eden™-V4, 400MHz, CN700 chipset, Mini-
ITX w/ 10/100 LAN, Mini PCI, SATA |
| MB770-500 |
VIA Eden™-V4 500MHz, CN700 chipset, Mini-
ITX w/ 10/100 LAN, Mini PCI, SATA |
| MB770F-R |
VIA Eden™-V4 1.0GHz, CN700 chipset, Mini-
ITX w/ 10/100, Gigabit LAN, Mini PCI, SATA,
TV-out |
| MB770-C15-R |
VIA C7 1.5GHz, CN700 chipset, Mini-ITX w/
10/100 LAN, Mini PCI, SATA |
MB770F-C15-R
(By request w/ MOQ) |
VIA C7 1.5GHz, CN700 chipset, Mini-ITX w/
10/100, Gigabit LAN, Mini PCI, SATA, TV-out |
| ID393-R |
Pin Header to DVI board |
| ID450-R |
Power interface board |
| IP115 |
Riser card with 1x PCI |
| IP151-R |
Riser card with 2x PCI |
| IP340 |
Riser card with 2x PCI |
| IP450-R |
Riser card with 2x PCI |
| CMI201-60 |
Chassis for Mini-ITX (low power), w/ 60W PSU, 2.5”
HDD holder, 1x PCI-E
(optional IP271-R, IP119-R riser
& LVDS/DVI ports) |
| CMI201-85 |
Chassis for Mini-ITX (low power), w/ 85W PSU, 2.5”
HDD holder, 1x PCI-E
(optional IP271-R, IP119-R riser
& LVDS/DVI ports) |
| CMI203-180 |
Chassis for Mini-ITX, w/ 180W PSU, 3.5” HDD holder,
2x PCI-E
(optional IP241, IP118-R riser card & iIO LCM) |
| CMI203-250 |
Chassis for Mini-ITX, w/ 250W PSU, 3.5” HDD holder,
2x PCI-E
(optional IP241, IP118-R riser card & iIO LCM) |
|
Remarks:
* Specifications are subject to change without prior notice.
*When ID393-R is used, dual independent display (DVI + LVDS extension mode)
is not supported. Mirror mode is supported (DVI and LVDS with same display);
DVI / LVDS single display is supported.
|
